Publication 2711P-PC007A-EN-P - March 2015
Copyright © 2015 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
Allen-Bradley, PanelView, and Rockwell Automation are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Rockwell Otomasyon Ticaret A.Ş., Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400
Rockwell Automation maintains current product environmental information on its website at http://www.rockwellautomation.com/rockwellautomation/about-us/sustainability-ethics/product-environmental-compliance.page.
6. Inspect all mounting levers to make sure each is in the correct locked position.
Turkey RoHS Directive
EEE Yönetmeliğine Uygundur. (In Conformity with the EEE Regulation)
Waste Electrical and Electronic Equipment (WEEE)
For More Information
These resources contain information about related products from Rockwell Automation.
You can view or download publications at http://www.rockwellautomation.com/literature/
. To order paper copies of
technical documentation, contact your local Allen-Bradley distributor or Rockwell Automation sales representative.
China RoHS Directive
产品中有害物质的名称及含量。
Name and content of hazardous substances in product.
ATTENTION: All mounting levers must be in the correct and same locked position to provide an adequate
gasket seal between the terminal and the panel. Rockwell Automation assumes no responsibility for water
or chemical damage to the terminal or other equipment within the enclosure because of improper
installation.
At the end of its life, this equipment should be collected separately from any unsorted municipal waste.
Resource Description
PanelView Plus 7 Performance Terminals User Manual,
publication 2711P-UM008
Provides details on how to install, configure, and operate
the PanelView Plus 7 Performance terminals.
Guidelines for Handling Lithium Batteries Technical Data,
publication AG-5.4
Provides guidelines for storing, handling, installing, and
disposing of lithium batteries.
Industrial Automation Wiring and Grounding Guidelines,
publication 1770-4.1
Provides general guidelines for installing a Rockwell
Automation® industrial system.
Product Certification website, http://www.ab.com
Provides declarations of conformity, certificates, and other
certification details.
The notch on the outside of mounting lever shows
its locked position. This view shows the mounting
levers locked in position 3.
部件名称
Component Name
有害物质
Hazardous Substances
鉛
Lead
(Pb)
汞
Mercury
(Hg)
鎘
Cadmium
(Cd)
六价铬
Hexavalent
Chromium
(Cr(VI))
多溴联苯
Polybrominated
Biphenyls
(PBB)
多溴二苯醚
Polybrominated
Diphenyl Ethers
(PBDE)
外壳
Housing
0O O O O 0
显示器
Display
X0 O O O 0
印刷电路板组件
Printed Circuit Board
Assemblies
XO O O O 0
金属部件
Metal Components
0O O O O O
接线和电缆
Wiring and Cable
0O 0 O O 0
电池
Battery
0O O O O 0
塑料部件
Plastic Components
OO O O O O
本表格依据 SJ/T 11364 的规定编制。
This form is based on the provisions established in SJ / T 11364.
O: 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要
求以下。
O: Indicates that this hazardous substance contained in all of the homogeneous materials for the part is below the
limit requirement in GB/T 26572.
X: 表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的
限量要求。
X: Indicates that this hazardous substance contained in at least one of the homogeneous materials used for this part is
above the limit requirement in GB/T 26572.
( 企业可在此处，根据实际情况对上表中打 “X” 的技术原因进行进一步说明。)
(If desired, descriptions of the components with an “X” can be provided here.)
To Previous Page
Loading...
Need help?
General
