Need help?Do you have a question about the Rockwell Automation Allen-Bradley PowerFlex 40 22B-D4P0N104 and is the answer not in the manual?
General| Model | PowerFlex 40 |
|---|---|
| Catalog Number | 22B-D4P0N104 |
| Input Voltage | 200-240V AC |
| Output Current | 4.0A |
| Relative Humidity | 5 to 95% (non-condensing) |
| Control Method | V/Hz, Sensorless Vector |
| Enclosure Type | IP20 / Open Type |
| Communication Options | RS-485 |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -40 to 70°C (-40 to 158°F) |
| Phase | Single |
| Braking | Dynamic Braking |
| Horsepower | 1 HP |
Details on connecting the drive to the power supply safely.
Essential steps for ensuring proper electrical grounding for safety.
Information on selecting appropriate branch circuit protection devices.
Procedures and recommendations for connecting power to the drive.
Guidelines for connecting digital and analog control signals.
Explains how to configure sources for start commands and speed references.
Crucial checks before energizing the drive for the first time.
Covers essential parameters for drive configuration and operation.
Details advanced parameters for fine-tuning drive functionality.
Explains fault types, descriptions, and causes.
Detailed descriptions and actions for specific drive fault codes.
Guides users through diagnosing and resolving common drive issues.
Introduction to the built-in PID control loop functionality.
How to select PID reference sources and feedback signals.
Explanation of proportional, integral, and differential gain parameters.
Step-by-step procedure for tuning PID loop parameters.
To Next Page