Rockwell Automation Publication PFLEX-AP005A-EN-P - October 2010 13
Drive Selection Considerations Chapter 1
PowerFlex Drive
Conversion Guide
The following table is for migrating your PowerFlex 700 drive installation to a
PowerFlex 750-series drive.
Table 6 - PowerFlex 700 Drive to PowerFlex 750-Series Drive Conversions
NOTE: Voltage rating is 480V AC for all drives listed below.
PowerFlex 700 Drive
(1)
PowerFlex 750-Series Drive Conversion
(2)
20B Amps
HP
(ND) Frame
Height
(mm)
Width
(mm)
Depth
(mm)
20F/
20G Amps
HP
(ND) Frame
Height
(mm)
Width
(mm)
Depth
(mm)
1P1 1.1 0.5 0
336 110 200
2P1 2.1 1.0 0 2P1 2.1 1 2
424.5 134.5 212
3P4 3.4 2.0 0 3P4 3.4 2 2
5P0 5.0 3 0 5P0 5.0 3 2
8P0 8.0 5 0 8P0 8.0 5 2
011 11 7.5 1 011 11 7.5 2
014 14 10 1
336 135 200
01414102
0222215 1 02222152
027 27 20 2
342.5 222 200
02727203
454 190 2120343425 2 03434253
040 40 30 3
517.5 222 200
04040303
0525240 3 05252404
474 222 212
0656550 3 06565504
077 77 60 4 759 220 202 077 77 60 5
555 270 212
096 96 75 5
644.5 309 275.5
09696755
125 125 100 5 125 125 100 6
665.5 308 346.5
156 156 125 6
850
(3)
404 275.5
156 156 125 6
180 180 150 6 186 186 150 6
248 248 200 6 248 248 200 6
292 292 250 7
1499 514.5 407
302 302 250 7
875 430 350
325 325 250 7 361 361 300 7
365 365 300 8
2374 758 889
361 361 300 7
415 415 350 8 415 415 350 7
481 481 400 8 485 485 400 8
(4)
2453 600 800
535 535 450 8
2374 758 1016
545 545 450 8
(4)
600 600 500 8 617 617 500 8
(4)
730 730 600 9 740 740 650 8
(4)
875 875 700 10 2374 1268 889
(1) All dimensions are IP20, NEMA/UL Type 1 unless specified otherwise.
(2) All dimensions are IP20, NEMA/UL Open type unless specified otherwise.
(3) Height dimension shown for a drive mounted in a cabinet; height dimension is 976.5 mm with required junction box if not cabinet-mounted.
(4) Frame enclosure is IP20, NEMA/UL Type 1 MCC style.
To Next Page
Loading...
Need help?
General
