Rockwell Automation Publication PFLEX-AP005A-EN-P - October 2010 5
Preface
Overview
The purpose of this publication is to assist in migrating a PowerFlex 700 drive to a
PowerFlex 750-Series drive. This publication is broken into three chapters:
• Chapter 1: Drive Selection Considerations
Compares the features of the PowerFlex 750-Series drives to the PowerFlex
700 drive.
• Chapter 2: Analog Speed Follower and Preset Speed
The control wiring and parameters of the PowerFlex 700 drive analog
speed follower are compared to the PowerFlex 753 drive (with main
control board I/O) and the PowerFlex 755 drive (with optional I/O
module).
• Chapter 3: Network Communications
What PowerFlex 700 20-COMM network options can be migrated to the
PowerFlex 750-Series drives are addressed, as well as the dedicated
communications in the PowerFlex 750-Series drives.
Additional Resources
These documents contain additional information concerning related Rockwell
Automation products.
You can view or download publications at http://www.rockwellautomation.com/
literature/. To order paper copies of technical documentation, contact your local
Rockwell Automation distributor or sales representative.
Resource Description
PowerFlex 700 AC Drives Vector Control Firmware 4.001 & Up,
Frames 0…10 User Manual, publication 20B-UM002
Provides information on how to install, start-up and troubleshoot the PowerFlex 700
adjustable frequency AC drives with vector control.
PowerFlex 750-Series AC Drives Technical Data, publication
750-TD001
Provides technical data regarding the PowerFlex 750-Series adjustable frequency AC
drives for a variety of industrial applications.
PowerFlex 750-Series AC Drives Installation Instructions,
publication 750-IN001
Provides information on how to install, start-up, and troubleshoot PowerFlex
750-Series adjustable frequency AC drives.
PowerFlex 750-Series AC Drives Programming Manual,
publication 750-PM001
Provides information on how to program the PowerFlex 750-Series adjustable
frequency AC drives.
PowerFlex 755 Drive Embedded EtherNet/IP Adaptor User
Manual, publication 750COM-UM001
Provides network communication information for the EtherNet/IP adaptor embedded
on the main control board in PowerFlex 755 drives.
PowerFlex 750-Series Drive DeviceNet Option Module User
Manual, publication 750COM-UM002
Provides network communication information for the optional 20-750-DNET module
that can be installed in a PowerFlex 750-Series drive.
PowerFlex 20-750-CNETC Coaxial ControlNet Option Module
User Manual, publication 750COM-UM003
Provides network communication information for the optional 20-750-CNETC module
that can be installed in a PowerFlex 750-Series drive.
20-Comm-E EtherNet/IP Adaptor User Manual, publication
20COMM_UM010
Provides network communication information for the optional 20-Comm-E EtherNet/IP
adaptor that can be installed in a PowerFlex 750-Series drive.
Industrial Automation Wiring and Grounding Guidelines,
publication 1770-4.1
Provides general guidelines for installing an Allen-Bradley industrial automation
system.
To Next Page
Loading...
Need help?
General
