Need help?Do you have a question about the Rockwell Automation STRATIX 8000 1783-MS06T and is the answer not in the manual?
General| Model | 1783-MS06T |
|---|---|
| Series | STRATIX 8000 |
| Product Type | Managed Switch |
| MPN | 1783-MS06T |
| Ports | 6 |
| Layer | Layer 2 |
| Switching Capacity | 12 Gbps |
| Jumbo Frame Support | Yes |
| Mounting | DIN Rail |
| MAC Address Table Size | 8K |
| Operating Temperature | -40 to 70 °C |
| Port Type | 10/100/1000 Mbps |
Overview of Stratix 8000 Ethernet Managed Switches, applications, and mounting.
Details on power connectors, console port, uplink ports, and various Ethernet ports.
Explanation of status indicators, CompactFlash, cabling, and auto-MDIX for monitoring and operation.
Guidelines for environmental conditions, enclosures, and pre-installation checks.
Procedures for placing, mounting on DIN rail or wall, and grounding the switch.
Connecting power, alarms, expansion modules, and SFP modules.
Using Express Setup for initial IP configuration and basic setup.
Methods for further configuration via web interface, software, or CLI.
Locating and using troubleshooting resources like status indicators and interfaces.
Interpreting power-on self-test results and status indicator meanings.
Troubleshooting connectivity problems, cables, and link status.
Addressing speed, duplex, autonegotiation, and performance issues.
Pinouts for 10/100 and 10/100/1000 Ethernet ports and connection schematics.
Details on 100BASE-FX ports, SFP modules, and fiber optic cable requirements.
Information on dual-purpose ports, console port, and adapter pinouts.
Specifics on cable length and type for SFP module fiber optic connections.
To Next Page
