Need help?Do you have a question about the RoDEK R2100A and is the answer not in the manual?
Details on selecting the best placement for the amplifier.
Guidance on connecting audio signal and remote wires.
Instructions for connecting speaker wires to terminals.
Critical steps for connecting power supply and ground.
Specifies the lowest acceptable load impedance for the amplifier.
How to set the amplifier's active crossover mode.
Recommended high-pass settings for specific speaker types.
Crossover settings for kickbass speaker systems.
Crossover settings for subwoofer integration.
Setting input gain for optimal signal-to-noise ratio.
Fine-tuning the phase relationship between speakers.
Details exclusions from warranty coverage.
To Next Page
General
