Need help?Do you have a question about the RoDEK RI-450-200 and is the answer not in the manual?
Details on selecting a suitable place for amplifier installation and ensuring proper cooling.
Specifies the minimum impedance requirements for safe amplifier operation and to prevent damage.
Instructions for connecting RCA audio signal cables and the remote switching cable from the head-unit.
Guidance on connecting loudspeaker wires to the amplifier terminals, including wire gauge and polarity.
Procedures for connecting positive and ground power cables from the car battery to the amplifier safely.
Explains how to set the operation mode (fullrange, highpass, lowpass) for each channel pair.
Illustrates typical system configurations for twin-satellite/subwoofer setups using diagrams.
Provides recommended highpass crossover frequency settings for different sizes of component and coaxial speakers.
Details how to set the lowpass crossover frequency for subwoofer systems for optimal bass reproduction.
Guides on correctly setting input gain controls for a noise-free dynamic headroom and maximum SPL.
Lists conditions and damages not covered by the amplifier's warranty.
Section for filling out the warranty certificate with purchase details for valid claims.
To Next Page
General
