Need help?Do you have a question about the RoDEK R680N and is the answer not in the manual?
Connects audio signals and remote turn-on wire.
Adjusts signal level and selects crossover operation modes.
Adjusts frequency cutoffs and acoustical phase.
Displays status, connects power, speakers, and includes protection fuses.
Guides proper placement for cooling and accessibility.
Specifies safe impedance loads for amplifier operation.
Details connection of audio signal and remote turn-on cables.
Instructions for connecting speaker wires to amplifier terminals.
Covers connecting power and ground cables from battery.
Configures amplifier for fullrange, highpass, or bandpass operation.
Recommends high-pass frequencies for satellite speaker systems.
Sets bandpass filters for kickbass speaker systems.
Configures bandpass filters for subwoofer systems.
Sets input gain levels for optimal signal-to-noise ratio.
Matches acoustical phase between subwoofer and other speakers.
Lists conditions not covered by the product warranty.
To Next Page
General
