Rofin Polilight Flare PLUS - Tripod Mount; Decontamination After Use; Polilight Flare+2 Spectra

To Next Page

To Previous Page

Polilight Flare Plus 2 manual –

Tripod Mount

The Ball mount provided is screwed into the tread located on head of the unit. The screw thread on the

Ball mount is used to attach the unit to a standard Tripod mount.

Decontamination of Flare+2 after use at a scene of crime

To clean the Flare+2 use a Neutral detergent such as Liquinox, Alconox, Surgicleanse Neutral Detergent

or equivalent

These Neutral Detergents are powerful, low-foaming, non-ionic detergent for the rapid and efficient

removal of biological materials from sensitive clinical surfaces and instruments prior to disinfection.

The Battery is submersible in disinfectant such as CAVICIDE or equivalent.

The Head is submersible in disinfectant such as CAVICIDE or equivalent from base to below output

filter. Output filter wiped with CAVICIDE or equivalent.

Polilight Flare+2 Spectra

OPERATION

Half Peak

Color/Centre Wavelength Bandwidth

UV 365nm 360 – 385nm

Purple 415nm 405 – 420nm

Blue 450nm 435 – 465nm

Cyan 505nm 485 – 515nm

Green 530nm 510 – 545nm

Green/Yellow 545nm 530 – 560nm

Red 620nm 615 – 635nm

White 400 – 700nm

InfraRed 850nm 835 – 865nm