Rofin Polilight Flare PLUS - Optional Accessories; Introduction to Accessories; Optional Wavelength Heads (Infra-Red); IR Usage Example

Polilight Flare Plus 2 manual –
18
INTRODUCTION
A number of optional accessories are available to allow the user to enhance the operation of the
Polilight Flare+2. These are:
• Optional wavelength heads including infra-red 850 and 940nm
• Barrier Filters
OPTIONAL WAVELENGTH UNITS HEADS INCLUDING INFRA-RED
OPERATION
Additional Flare+2 units can be purchased. These include wavelengths found in the Polilight PL500
(Infra-red wavelengths 850 and 940nm).
WARNING
The IR is invisible to the naked eye. Extra care should be taken when using these
wavelengths.
Example of using IR with IR sensitive camera or night vision goggles
Figure 8 is of a dark jumper that under normal light shows a bullet hole but not much else. Under IR
850 nm light you can now see a blood stain which is the medium tone and a powder deposit which is
the dark tone.
Figure 8. Bloodstained Jumper
OPTIONAL ACCESSORIES