To Next PageTo Next Page
Need help?Do you have a question about the Roger Technology H30 Series and is the answer not in the manual?
General| Brand | Roger Technology |
|---|---|
| Model | H30 Series |
| Category | Garage Door Opener |
| Language | English |
Failure to follow manual instructions can cause personal injury or device damage.
Manual is for qualified personnel; ROGER TECHNOLOGY is not liable for improper use.
Check product integrity and avoid explosive areas before installation.
Make structural changes and install safety devices per standards.
Compliance with EN 12453/12455 for impact force limitation and safety devices.
Ensure proper earthing, differential breaker (0.03A), and overcurrent protection.
Handle electronics with antistatic arms, use original spares, provide user manuals.
Dispose of packaging responsibly and keep instructions for future users.
Statement of compliance with EU directives and applied technical standards.
List and description of system components and their numbering.
Physical dimensions of the H30 automation unit.
Detailed technical specifications for different H30 models.
Table comparing technical data across H30 models.
Checks to perform before installing the gate automation system.
Steps for correctly installing the foundation plate.
Instructions for mounting the H30 automation unit onto the foundation plate.
Procedure for correctly fixing the rack to the pinion.
Steps for installing mechanical and magnetic limit switches.
Overview of electrical connections for H30 gear motors and control unit.
Mandatory earth connection for motor operation as shown in figure.
Wiring diagram for mechanical limit switches to H70/104AC control unit.
Wiring diagram for magnetic limit switches to H70/104AC and H70/105AC.
