EasyManua.ls Logo

Roger Technology R90/F4ES - User Manual

Roger Technology R90/F4ES
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ROGER FOTOCELLULE
R90/F4ES - G90/F4ES
IT - Istruzioni e avvertenze per l’installatore - pag.2
EN - Instruction and warnings for the installer - pag.6
DE - Anleitungen und Hinweise für den Installateur - pag.10
FR - Instructions et avertissements pour l'installateur - pag.14
ES - Instrucciones y advertencias para el instalador - pag.18
PT - Instruções e avisos para o instalador - pag.22
automazioni evolute
|
IS61 Rev.02
27/01/2015
Question and Answer IconNeed help?

Do you have a question about the Roger Technology R90/F4ES and is the answer not in the manual?

Roger Technology R90/F4ES Specifications

General IconGeneral
BrandRoger Technology
ModelR90/F4ES
CategorySecurity Sensors
LanguageEnglish

Summary

Introduction to the Instructions and Warnings

Safety and Installation Warnings

Crucial safety precautions and operational warnings for qualified installers regarding installation and operation.

Product Description

Synchronized Photocell Operation

Explains synchronized photocell technology, MASTER/SLAVE setup, and connectivity for multiple pairs.

Available Models

Lists the R90/F4ES and G90/F4ES versions of the photocells.

Technical Specifications

Product Technical Data

Details technology, power, range, dimensions, temperature, and protection ratings.

Terminals and Signalling

TX;RX Connections and Indicators

Outlines terminal assignments and LED status indicators for transmitter and receiver units.

Installation

Mounting Procedures

Guidance on selecting mounting locations and attaching the photocell shells.

Wiring and Connections

Step-by-step instructions for wiring TX and RX photocells, including power and sync connections.

Configuration and Alignment

Procedures for setting MASTER/SLAVE, jumper configurations, and aligning photocells for optimal signal reception.

Container Closure

Instructions for properly closing the R90/F4ES and G90/F4ES photocell enclosures after installation.

Testing

Operational Testing

Method for verifying photocell functionality by interrupting the beam and checking the control device's response.

Maintenance

Routine Maintenance

Recommended schedule for cleaning, checking operation, and inspecting for wear or damage.

Disposal

Product Disposal Guidelines

Regulations and procedures for the responsible disposal of the photocell product.

Declaration of Conformity

Compliance and Certification

Manufacturer's declaration of compliance with EU directives and applicable standards.