12
Place and data
Installer
signature
Customer
signature
• The passing of the above mentioned tests allows the product to be considered suitable for use; it is also the formal act of final delivery of the product in
its place of installation and use.
• The CE plate applied to the motorized door or gate must be similar to the one shown below.
• The technician installer fully confirms the measurements and details of all the functional checks and tests indicated above.
• By signing this report, the customer:
• Confirms that the functional characteristics of the product fulfil their required specifications and accepts delivery of the product itself;
• declares that they have received the use and maintenance instructions for this product, that they have read the instructions and that they will make the
instructions available to any person authorised to use the product. Declares that they have been informed of all legislative requirements regarding the
usage of the product.
• undertakes to ensure that the product is used correctly and will be maintained adequately and kept in proper working order as indicated in the use and
maintenance instructions;
• declares that they have received the EC Declaration of Conformity (in compliance with Annexe IIA of EC Directive 98/37/EC).
Note:
CUSTOMER COPY
(*) INDICATE IN THE TARGET HERE ABOVE THE DATA RELATING TO THE SWING GATE REQUIRED.
AUTOMATIC OPENING
WWW.ROGERTECHNOLOGY.COM
SISTEMA AUTOMATICO
INSTALLATO DA:
MODELLO
ALIMENTAZIONE
ANNO
PESO CANCELLO
DIMENSIONI(L+H)
SERIAL NUMBER
2006/42/EC
EN 13241-1 2003
AUTOMATIC SYSTEM
INSTALLED BY:
MODEL
POWER SUPPLY
YEAR
GATE WEIGHT
DIMENSIONS(L+H)
SERIAL NUMBER
2006/42/EC
EN 13241-1 2003
To Next Page
Loading...
