Roger BE20 Series - 13 EC Declaration of Conformity; Declaration of Conformity Details; Compliance Standards and Representative Information

23
13 EC Declaration of Conformity (according to Annex II A of the Machinery Directive 2006/42 / EC)
The legal representative of the company:
Declare under his own responsibility that the product / s named:
complies with the national Standard that transpose the following Community Directives:
(Where specically applicable)
• Machinery Directive 2006/42/CE
• Low Voltage Directive 2014/35/EU
• Electromechanical Compatibility Directive 2014/30/EU
• RTT&E Directive 2014/53/EU
The products included in this declaration are installed in compliance with the applicable parts of the following standards:
• EN 13241-1 Industrial, commercial and garage doors and gates. Product standards.
• EN 12453 Industrial, commercial and garage doors and gates. Safety in use of motorized doors - Requirements
• EN 12445 Industrial, commercial and garage doors and gates. Safety in use of motorized doors - Test methods.
The validity refers to what was done and used by the declarant, for the construction and operation of the above mentioned product.
The validity lapses in the cases dened by the following points:
1. Changes are made to the product, not authorized by the declarant;
2. The maintenance obligations set by the Declarant are expected, related to the maintenance of adequate safety standards and good functioning, required by law.
3. In case of improper use of the product.
The legal representative:
Company name
Legal address
Fiscal Code or VAT
number:
Telephone: e-mail address
Name and address of the person authorized to set up the technical le:
Objective description: Batch and serial number
Plant location
Reference name:
Telephone: e-mail address
Name:
Role: Signature:
Technical documentation attached
File no.
Date of this declaration: