20
10 Monthly maintenance checks
To avoid problems it is important to perform simple maintenance checks on your automation on a monthly basis.
Some basic information on the maintenance of your automation are indicated in chapter 4 of this USER MANUAL.
Below you will find a summary table to record your checks.
YEAR : ...............................................................
G F M A M G L A S O N D
Verify that the photocells operate correctly during the opening operation.
Verify that the photocells operate correctly during the closing operation.
Clean the photocells
Eliminate any vegetation in the range of the photocells or that could hinder automation.
Release the motorized door or gate.
Lubricate the pins / hinges and other moving parts
Check the functioning of sensitive edges
YEAR : ...............................................................
G F M A M G L A S O N D
Verify that the photocells operate correctly during the opening operation.
Verify that the photocells operate correctly during the closing operation.
Clean the photocells
Eliminate any vegetation in the range of the photocells or that could hinder automation.
Release the motorized door or gate.
Lubricate the pins / hinges and other moving parts
Check the functioning of sensitive edges
YEAR : ...............................................................
G F M A M G L A S O N D
Verify that the photocells operate correctly during the opening operation.
Verify that the photocells operate correctly during the closing operation.
Clean the photocells
Eliminate any vegetation in the range of the photocells or that could hinder automation.
Release the motorized door or gate.
Lubricate the pins / hinges and other moving parts
Check the functioning of sensitive edges
YEAR : ...............................................................
G F M A M G L A S O N D
Verify that the photocells operate correctly during the opening operation.
Verify that the photocells operate correctly during the closing operation.
Clean the photocells
Eliminate any vegetation in the range of the photocells or that could hinder automation.
Release the motorized door or gate.
Lubricate the pins / hinges and other moving parts
Check the functioning of sensitive edges
To Next Page
Loading...
