Roger BE20 Series - 5 Unlock instructions; BE20 - BR20 - R20 Series Unlock;Lock; BM20 - M20 - H20 - SMARTY Series Unlock;Lock; BH23 - H23 Series Unlock;Lock

5
5 Unlock instructions
Warning: always disconnect the installation from mains electricity and, if applicable, from the batteries before unlocking and locking the
automation system.
BE20 - BR20 - R20 Series
UNLOCKING (g. 1)
Open the lock cover (ref. 1), insert the key included in the lock and turn clockwise
by 90° (ref. 2), then pull the key first and then the lever to open the door (ref. 3)
completely. Manoeuvre the gate manually.
LOCKING (g. 2)
WARNING: operate the lock release lever with caution to avoid the risk of injury to the
fingers.
Close the lock release lever. Insert the key included into the lock and turn clockwise
by 90°.
Once the lock release lever has returned to its original position, turn the key
anticlockwise, remove from the lock and close the lock cover.
BM20 - M20 - H20 - SMARTY Series
UNLOCKING (g. 1)
Turn the lock cover (rif. 1), insert the key included in the lock and turn clockwise
by 90° (ref. 2), then pull the key first and then the lever to open the door (ref. 3)
completely. Manoeuvre the gate manually.
LOCKING (g. 2)
WARNING: operate the lock release lever with caution to avoid the risk of injury to the
fingers.
Close the lock release lever. Insert the key included into the lock and turn clockwise
by 90°.
Once the lock release lever has returned to its original position, turn the key
anticlockwise, remove from the lock and close the lock cover.
BH23 - H23 Series
UNLOCKING (g. 1)
Turn the lock cover (rif. 1), insert the key included in the lock and turn clockwise
by 90° (ref. 2), then pull the key first and then the lever to open the door (ref. 3)
completely. Manoeuvre the gate manually.
LOCKING (g. 2)
WARNING: operate the lock release lever with caution to avoid the risk of injury to the
fingers.
Close the lock release lever. Insert the key included into the lock and turn clockwise
by 90°.
Once the lock release lever has returned to its original position, turn the key
anticlockwise, remove from the lock and close the lock cover.
R23 Series
UNLOCKING (g. 1)
Open the lock cover (ref. 1), insert the key included in the lock and turn clockwise by 90° (ref. 2).
Turn the lever by 180°(ref. 3).
Manoeuvre the gate manually.
LOCKING (g. 2)
WARNING: operate the lock release lever with caution to avoid the risk of injury to the fingers.
Turn the lock release lever by 180° and return it to its original position. Insert the key and turn
anticlockwise, remove from the lock and close the lock cover.
1
3
2
3
1
2
Fig. 1
Fig. 2
1
Fig. 1
Fig. 2
2
3
3
2
1
2
1
3
1
2
3
Fig. 1
Fig. 2
1
2
3
3
2
1
Fig. 1
Fig. 2