To Next PageTo Next Page
Need help?Do you have a question about the Roger R20 Series and is the answer not in the manual?
Provides guidance for qualified installers on safe and correct product installation.
Details specifications for R20 models, including power, current, and temperature.
Presents detailed technical parameters for various R20 models.
Step-by-step guide for installing the R20 piston on rear and front brackets.
Wiring optional opening/closing limit switches to the control unit.
Ensures mechanical stops are always in place for gate opening and closing.
Procedure for adjusting stop microswitches for gate open/close positions.
Provides guidance for qualified installers on safe and correct product installation.
Details specifications for R20 models, including power, current, and temperature.
Presents detailed technical parameters for various R20 models.
Step-by-step guide for installing the R20 piston on rear and front brackets.
Wiring optional opening/closing limit switches to the control unit.
Ensures mechanical stops are always in place for gate opening and closing.
Procedure for adjusting stop microswitches for gate open/close positions.
General| Motor voltage | 24 V DC |
|---|---|
| Max. thrust | 2000 N |
| Operating temperature | -20°C to +55°C |
| Type of limit switch | Magnetic |
| Encoder | Yes |
| Operating Voltage | 24V DC |
| Warranty | 2 years |
| Model | R20 Series |
| Power supply | 230 V AC |
| Opening time at 90° | 15 seconds |
| Opening Speed | 15 s |
| Closing Speed | 15 s |
| Safety Features | Obstacle detection |
| Control Options | Remote control, keypad, smartphone app |
