Roger R70/1AC - User Manual

IS30 Rev. 03
10/05/2011
ISTRUZIONI E AVVERTENZE PER L’INSTALLATORE • INSTRUCTIONS AND
RECOMMENDATIONS FOR THE INSTALLER • ANWEISUNGEN UND HIN-
WEISE FÜR DEN INSTALLATEUR • INSTRUCTIONS ET AVERTISSEMENTS
POUR L’INSTALLATEUR • INSTRUCCIONES Y ADVERTENCIAS PARA EL
INSTALADOR • INSTRUÇÕES E AVISOS PARA O INSTALADOR
CENTRALE DI COMANDO R70/1AC • CONTROL UNIT R70/1AC •
STEUERZENTRALE R70/1AC • CENTRALE DE COMMANDE R70/1AC •
CENTRAL DE MANDO R70/1AC • CENTRAL DE COMANDO R70/1AC
R70/1AC

Roger R70/1AC Specifications

General

Type	Control Unit
Model	R70/1AC
Manufacturer	Roger
Number of relay outputs	1
Tamper input	Yes
Operating temperature range	-10°C to +55°C
Frequency	50-60 Hz
Storage Temperature	-20°C to +60°C

Summary

Power Supply and Specifications

Power Supply Details

Provides input voltage, frequency, and power ratings for the control unit and connected accessories.

Operating Parameters

Details motor power, working temperature, torque adjustment, and timing settings.

Wiring and Connections

Terminal Block Overview

Lists and describes all terminal connections for inputs, outputs, and power.

Configuration and Adjustments

Trimmer Settings

Guides for setting operating time, pause time, pedestrian opening, and anti-crushing sensitivity.

Torque Adjustment

Instructions for adjusting the motor torque using the autotransformer.

DIP Switch Functions

Explains the function of each of the 12 DIP switches for various operational modes.

Test and Safety Features

Photocell Test Function

Describes how to enable and use the photocell test before operation.

Declarations of Conformity

Conformity to Directives

Statements of compliance with EMC and Low Voltage directives and applicable standards.