Rohde & Schwarz CMW500 Series - Page 262

Command Reference
R&S
®
CMW500
262User Manual 1173.9463.02 ─ 02
Parameters:
<Format> ASCii | XML
Default value: XML
Example:
TRACe:REMote:MODE:FILE1:FORMat XML
Select XML as file format for sub-instrument 1.
Firmware/Software: V2.0.10
TRACe:REMote:MODE:FILE<inst>:NAME '<FilePath>'
Specify path and name of the target file for tracing of the remote interface. For different
sub-instruments specify different files.
If you specify a new target file while tracing, the old target file is closed, the new file is
created and tracing is continued with the new file.
Suffix:
<inst>
.
1..2
Selects the sub-instrument
Parameters:
'<FilePath>' String parameter specifying path and name of the file
Default values: "@LOG\RemoteTrace-Inst0.xml" and "@LOG
\RemoteTrace-Inst1.xml"
Example:
TRACe:REMote:MODE:FILE1:NAME "@LOG\trace1.xml"
Specifies the file trace1.xml in the log directory as target file for
tracing (sub-instrument 1).
Firmware/Software: V2.0.10
TRACe:REMote:MODE:FILE<inst>:SIZE <FileSize>
Specifies the maximum size of the trace file in bytes.
Suffix:
<inst>
.
1..2
Selects the sub-instrument
Parameters:
<FileSize> Recommended minimum value: 40000 bytes
Maximum value: 1000000000 bytes (1 GB)
Default value: 1000000000 bytes (1 GB)
Example:
TRACe:REMote:MODE:FILE1:SIZE 100000000
Set 100 MB as maximum size for the trace file of sub-instrument
1.
Firmware/Software: V2.0.10
TRACe:REMote:MODE:FILE<inst>:STARtmode <StartMode>
Specifies whether tracing shall be started automatically or manually.
Instrument-Control Commands