Instrument Tour
R&S
®
FPL1000
45Getting Started 1323.1602.02 ─ 07
The assignment of the RJ-45 connector supports twisted-pair category 5
UTP/STP cables in a star configuration (UTP stands for unshielded twisted pair,
and STP for shielded twisted pair).
Provided the network administrator has assigned you the appropriate rights and
adapted the Windows firewall configuration, you can use the interface, for exam-
ple:
●
To transfer data between a controlling device and the test device, e.g. to run a
remote control program.
●
To access or control the measurement from a remote computer using the
"Remote Desktop" application (or a similar tool)
●
To connect external network devices (e.g. printers)
●
To transfer data from a remote computer and back, e.g. using network folders
For details, see the R&S FPL1000 user manual.
5.2.8 USB
The rear panel provides two additional female USB (3.0 standard) connectors to
connect devices like a keyboard, a mouse or a memory stick (see also Chap-
ter 5.2.8, "USB", on page 45).
5.2.9 Sensor Connector
The LEMOSA female connector is used to connect power sensors of the
R&S NRP-Zxy family. For a detailed list of supported sensors, see the data sheet.
For details on configuring and using power sensors, see the user manual.
This connector is provided by the "Additional Interfaces" option R&S FPL1-
B5.
5.2.10 Aux. Port
A 25-pole SUB-D male connector used as an input and output for low-voltage
TTL control signals (max. 5 V). This connector is provided by the "Additional
Interfaces" option R&S FPL1-B5.
Rear Panel View
To Next Page
Loading...
