Rohde & Schwarz R&S FSH6 - One-Port Measurement of Cable Loss; Cable Measurement Setup and Functions; Cable Length and Frequency Settings; Test Setup Calibration and Display

R&S
®
FSH3 and R&S
®
FSH6 Data Sheet
1145.5973.12 TI.3 E-11
Specification Condition R&S
®
FSH3 R&S
®
FSH6
Markers
Number of markers or delta
markers
max. 6
Marker functions peak, next peak, minimum,
center = marker frequency,
reference level = marker level, all markers to peak
Marker displays normal (level), noise marker, frequency counter
(count)
Trigger
free-running, video, external
Audio demodulation
AM (video voltage without AGC) and FM
Inputs
RF input
N female
Input impedance
50 Ω
VSWR 10 MHz to 3 GHz
10 MHz to 6 GHz
typ. 1.5
typ. 1.5
Trigger/external reference input
BNC female, selectable
Trigger voltage
TTL
Reference frequency
10 MHz
Required level
from 50 Ω
10 dBm
Outputs
AF output
3.5 mm mini jack
Output impedance
Open-circuit voltage
100 Ω
adjustable up to 1.5 V
Tracking generator only models 145.5850.13,
1145.5850.23 and
1145.5850.26
Frequency range
5 MHz to 3 GHz 5 MHz to 6 GHz
Output level model 1145.5850.13
model 1145.5850.23
model 1145.5850.26
f < 3 GHz
f > 3 GHz
-20 dBm (nominal)
0 dBm/-20 dBm,
selectable
-10 dBm (nominal)
-20 dBm (nominal)
Output impedance
50 Ω, nominal
Interfaces
RS-232-C optical interface
Baud rate 1200, 2400, 9600, 19200, 38400, 57600, 115200
baud
Power sensor
7-contact female connector (type Binder 712)