New Functionality / Changed Behavior
Support of Equipment Configuration Viewer.
Consecutive identical messages are bundled in info history and SCPI
message queue.
Added Emulations for Keysight EXG Generators (N517x).
Activated internal level limits for frequencies below 1 MHz.
The minimal dwell time has been reduced to 1 ms
The minimal dwell time has been reduced to 1 ms
After viClear remote connection via USB not working.
After executing 'Fill UCOR data with sensor' error messages occures
twice.
The correction value doesn’t have an effect.
In rare cases the error message “RFB6.BB: Output unleveled: Gain Control on Upper Limit” appears in
the history.
To Next Page
Loading...
