Rohde & Schwarz R&S SMA100A - User Manual

R&S
®
SMA100A
Signal Generator
Release Notes
Firmware Version 3.50.057.29
© 2016 Rohde & Schwarz GmbH & Co. KG
Muehldorfstr. 15, 81671 Munich, Germany
Phone: +49 89 41 29 - 0
Fax: +49 89 41 29 12 - 164
E-mail: mailto:info@rohde-schwarz.com
Internet: http://www.rohde-schwarz.com
Subject to change
R&S
®
is a registered trademark of Rohde & Schwarz GmbH & Co. KG. Trade names are trademarks of the owners.
The firmware of the instrument makes use of several valuable open source software packages. For information, see the "Open Source Acknowledgment"
on the user documentation CD-ROM (included in delivery).
The following abbreviations are used throughout this document: R&S
®
SMA100A is abbreviated as R&S SMA100A.
Test and Measurement
Release Notes

Rohde & Schwarz R&S SMA100A Specifications

General

Output Impedance	50 Ω
Pulse Modulation Rise/fall time	≤ 20 ns
ALC	Yes
Modulation Types	AM, FM, Pulse
Harmonics	< -30 dBc
Non-harmonic Spurious	< -70 dBc
Display	Color LCD
Power Supply	100 V to 240 V AC, 50 Hz to 60 Hz

Summary

Information on Current Version and History

Special hints for particular instruments and firmware versions

Provides specific advice and warnings for different instrument serial numbers and firmware versions.

Version 3.50.057.29

Details the latest firmware version's changes, new features, and bug fixes.

Version 3.01.102.11

Details changes for a key firmware version referenced in special hints regarding downgrade limits.

Version 2.15.185.13

Details changes for a firmware version noted for specific ISO update procedures.

Information on remote control emulations

Firmware Update

Update Information

Explains the general procedures and requirements for updating the instrument's firmware.

Firmware update using R&S firmware update file via USB memory stick

Step-by-step guide for updating firmware using a USB memory stick.

Firmware update using R&S firmware update file via LAN

Step-by-step guide for updating firmware using a LAN connection.

Firmware update using ISO image

Procedure for updating firmware using an ISO image file for system recovery.

Customer Support

Technical support - where and when you need it

Contact information and details for obtaining technical support from Rohde & Schwarz centers.

Up-to-date information and upgrades

Instructions on how to stay informed about new application notes and upgrades.