R&S SMA100A Information on the Current Version and History
Release Notes for Firmware 1171.5360.52 17
1.18 Version 2.05.220.13
Released: December 2008
Fixed Issues
● File manger shows invalid directories
● Bugfix for selftest
1.19 Version 2.05.220.10
Released: November 2008
Modified Functionality
● Remote control emulation: The selected remote control emulation will be displayed
in the info line
Fixed Issues
● The button “Adjust DME Pulse Slope” in the dialog “Internal Adjustemnts” does not
have any function until the DME dialog would be opened for the first time
● During the DME analysis the error message “Err-222 Value out of range” appears
● SMA-B103L and SMA-B106L does not support DME
● The tooltip does not display the correct values and units
● Changes at the level units does not work
● The BUSY indicator does not appear during the whole preset time
● Some read only parameters are not marked as read only parameters
● Downgrade to a firmware version 2.05.68.18 or lower does not work
1.20 Version 2.05.220.02
Released: October 2008
New Functionality
● New feature DME Modulation (Option R&S® SMA-K26)
● New feature Power Analysis (Option R&S® SMA-K28)
● New feature remote control emulation HP 8642
● New feature remote control emulation HP 8645
● New feature remote control emulation HP 8647/8648
To Next Page
Loading...
