R&S SMA100A Information on the Current Version and History
Release Notes for Firmware 1171.5360.52 24
● FM deviation: missing SCPI commands
● FM/PhiM: switching of input impedance incorrect
● CF-Cards could not be changed between different instruments
1.30 Version 2.02.76
Released: June 2006
New Functionality
● New sweep mode external start/stop
Fixed Issues
● Entering IP Address crashes the software
● Host name might be changed only with protection level 1
● List mode frequency higher than 3 GHz doesn’t work
● 2 tone AM deviation incorrect
● List mode doesn’t stop by Preset
● List mode doesn’t support more than 30 elements
● Firmware hangs while writing time monitoring data
● MMEM have problems with spaces
● Firmware restarts while open dialog level
● Some help pages are wider than the display
● Button “Adjust FM Offset” has to be remove in extern digital selection
● Pulse generator trigger input: wrong settings
1.31 Version 2.01.11
Released: January 2006
Modified Functionality
● Display the option R&S SMA-B81 (if installed) in the setup software options
dialog
● Date and time can be set
● Info manager shows messages only once
● Improvement for fast hop bus
To Next Page
Loading...
