R&S SMA100A Information on the Current Version and History
Release Notes for Firmware 1171.5360.52 15
● The SCPI commands FREQ:CENT? MAX/MIN and FREQ:SPAN? MAX/MIN
returns always the maximum/minimum RF frequency
● Level user step does not work correct as expected
● Remote control emulation Rohde & Schwarz SMGU: Ignore white spaces
● Remote control emulation HP 8662: Errors while mixing different modulations
● Remote control emulation HP 8662: Command FR causes an error “Value out of
range”
● Network settings (e.g. IP-Address) were lost when configured while no network is
attached
● Missing error message when attempting to disable USB mass storage usage while
storage is attached
● Sporadic lockups in raw ethernet channel
● Several issues regarding SCPI MMEM subsystem
● If the screensaver is disabled by SCPI the display is not switched on
1.15 Version 2.10.001.31
Released: October 2009
New Functionality
● Composite AM (15 Hz/135 Hz) included in DME modulation (Option R&S® SMA-
K26)
Fixed Issues
● ILS Modulation: Wrong LF Output Level
● In rare cases, an error message “Settings Conflict” occurs after PRESET
1.16 Version 2.10.001.26
Released: June 2009
New Functionality
● Remote control emulation Rohde & Schwarz SMGU/SMHU
Modified Functionality
● All avionics modulation (Options R&S® SMA-K25: VOR/ILS and R&S® SMA-K26:
DME): COM/ID code supports numerics
To Next Page
Loading...
