R&S SMA100A Information on the Current Version and History
Release Notes for Firmware 1171.5360.52 22
Fixed Issues
● Dialog ‘Reference Oscillator’: Input field for Adjustment DAC value too small
● Dialog ‘Frequency’: Rotary knob click on frequency crashes the firmware
● Dialog ‘Update’ doesn’t appears under setup menu
● Problems editing list mode table
● The screen saver wait time doesn’t have any effect
● Dialog Security: Disable USB dvice and disable LAN connections doesn’t work
● Dialog Security: User password and VNC password couldn’t be changed
● Setting times RF Off RF On are longer than RF On RF Off
● While rebooting the instrument, the IP address is lost
● List mode: While learning no progress bar appears
● Level error for FM and Pulse modulation by f < 6.6 MHz
● Winbar shows only one modulation
● Polarity could be changed for pulse generator gate
● Preset crashes the firmware
● LOCAL key doesn’t work
1.26 Version 2.02.149
Released: December 2006
New Functionality
● Operating altitude up to 4600m (Options R&S SMA-B46)
Fixed Issues
● Modulation ILS: display DDM definition
● Modulation ILS-GS, ADF: COM ID removed for ILS-GS and added to ADF
● HP Emulation: Display info message if RF is off in emulation mode
● HP Emulation: The remote command ms crashes the firmware
● HP Emulation: Corrections of command as
To Next Page
Loading...
