R&S SMA100A Information on the Current Version and History
Release Notes for Firmware 1171.5360.52 16
Fixed Issues
● DME Modulation: ID Rate not correct
1.17 Version 2.10.001.22
Released: June 2009
New Functionality
● Pulse Train (Option R&S® SMA-K27)
● Remote control emulation Aeroflex 2023/2024
● Remote control emulation Aeroflex 2050
● Remote control emulation HP 8643/8644
● Remote control via RS232 by means of a standard external USB to RS232 adapter
Modified Functionality
● Improved NRP-Z Power Analysis (Option R&S® SMA-K28) including Pulse Data
Analysis capabilities and gate mode
● All avionics modulation (Options R&S® SMA-K25: VOR/ILS and R&S® SMA-K26:
DME): COM/ID code supports up to 4 characters
● VOR modulation (Option R&S®SMA-K25): Subcarrier frequency resolution
changed from 10 Hz to 0.1 Hz
● ILS-GS and ILS-LOC modulation (Option R&S® SMA-K25): DDM can be entered
in %
● DME modulation (Option R&S® SMA-K26): Variable squitter rate
● Improved frequency offset setting
● Instrument can be switched off by remote command: SYSTem:SHUTdown
● Instrument firmware can be restarted by remote command: SYSTem:RESTart
● New dialog SETUP / NRP-Z Info provides information of attached power sensors
and the feasibility to update the firmware of attached power sensors
● Improved file selector and file manager
● USB Resource String: Product ID displayed as HEX-value
Fixed Issues
● Remote control: Sporadic locks in raw Ethernet channel
● Storing files using MMEM instructions failed if file already exists (affects SAV/RCL)
● Values of 0.0 sometimes displayed with too much digits and improper unit
To Next Page
Loading...
