R&S SMA100A Information on the Current Version and History
Release Notes for Firmware 1171.5360.52 19
1.22 Version 2.05.68.17
Released: May 2008
Fixed Issues
● Modulation ILS-GS/ILS-LOC: Entering DDM values less then -0.8 (ILS-GS) or less
then -0.4 (ILS-LOC) crashes the software, if DMM is coupled to SDM
1.23 Version 2.05.68.13
Released: April 2008
New Functionality
● Support of NRP-Zxx power sensors (power viewer and user correction)
● Chirp modulation, this feature is available only for interface boards with part
number 1400.0530.02
● Phase Continuous Frequency Settings
● Remote control emulation for HP 8643/8644
Modified Functionality
● Support of new standard synthesis (SSYN) with part number 1141.4220.02
● Support of new synthesis extension (SMA-B20, SYNEX) with part number
1142.0270.02
● Support of new clock synthesis (SMA-B29, ClkSyn) with part number
1400.2749.02
● DC offset for clock synthesis (SMA-B29), this feature is available only for clock
synthesis with part number 1400.2749.02
● LF generator: LF generator frequency resolution changed from 0.1 Hz down to
0.01 Hz
● RF Frequency Sweep: Support of new shape ‘triangle’
● RF Level Sweep: Support of new shape ‘triangle’
● LF Frequency Sweep: Support of new shape ‘triangle’
● The behaviour of the WINBAR key has been modified. The WINBAR key toggles
through all open windows
● The behaviour of the DIAGRAM key has been modified. The DIAGRAM key toggles
between diagram, the summary screen and the last open dialog
● Dialog File Manger: Handling improved
● Support of up to four USB mass memory devices (e.g. USB memory sticks) for
user data
To Next Page
Loading...
