Rohde & Schwarz R&S ZNB20 - Page 304

GUI Reference
R&S
®
ZNB/ZNBT
304User Manual 1173.9163.02 ─ 53
Background information
Refer to "Trace Types" on page 93.
All Data to <Destination>
Stores the current data of all data traces in the active recall set to memory traces, in
accordance with the Destination setting. No trace functions are applied to the stored
traces.
Remote command:
TRACe:COPY
All Data & Func to <Destination>
Stores the current data of all data traces in the active recall set to memory traces, in
accordance with the Destination setting. Trace functions are applied to the stored
traces.
For information on trace functions, see "Data & Func to <Destination>" on page 303.
All Data to <Destination> stores the raw trace without the trace functions, "All Data &
Func to <Destination>" stores the trace after it has been transformed using trace func-
tions.
Remote command:
CALCulate<Chn>:MATH:MEMorize
Destination
Selects the destination for the All Data to <Destination> and All Data & Func to <Desti-
nation> functions, that operate on all data traces in the active recall set.
●
"Mem":
For each data trace with associated memory traces, the current trace data are cop-
ied to the first associated memory trace, overwriting existing data. For data traces
without associated memory trace, the current trace data are copied to a new mem-
ory trace, associated to this data trace.
●
"New":
Trace Config Softtool