Rohde & Schwarz RTA4000 - Page 650

Remote control commands
R&S
®
RTA4000
650User Manual 1335.7898.02 ─ 08
Usage: Query only
BUS<b>:CAN:FRAMe<n>:BYTE<o>:VALue?
Returns the decimal value of the specified byte.
Suffix:
<b>
.
1..4
<n> *
Selects the frame (1...n).
<o> *
Selects the byte number (1...m).
Return values:
<ByteValue> Decimal value
Usage: Query only
17.11.5.4 CAN - search
SEARch:PROTocol:CAN:CONDition................................................................................ 650
SEARch:PROTocol:CAN:FRAMe.....................................................................................651
SEARch:PROTocol:CAN:ACKerror.................................................................................. 651
SEARch:PROTocol:CAN:BITSterror.................................................................................652
SEARch:PROTocol:CAN:CRCerror..................................................................................652
SEARch:PROTocol:CAN:FORMerror................................................................................652
SEARch:PROTocol:CAN:FTYPe......................................................................................652
SEARch:PROTocol:CAN:ITYPe.......................................................................................652
SEARch:PROTocol:CAN:ICONdition................................................................................653
SEARch:PROTocol:CAN:IDENtifier..................................................................................653
SEARch:PROTocol:CAN:DLENgth...................................................................................653
SEARch:PROTocol:CAN:DCONdition...............................................................................653
SEARch:PROTocol:CAN:DATA........................................................................................654
SEARch:PROTocol:CAN:CONDition <SearchCondition>
Sets the event or combination of events to be searched for. Depending on the selected
event, further settings are required.
Parameters:
<SearchCondition> FRAMe | ERRor | IDENtifier | IDData | IDERror
FRAMe
Search for a frame type. Set the frame type with SEARch:
PROTocol:CAN:FRAMe.
ERRor
Search for errors of one or more error types. Set the error types
with SEARch:PROTocol:CAN:ACKerror, SEARch:
PROTocol:CAN:BITSterror, SEARch:PROTocol:CAN:
CRCerror and SEARch:PROTocol:CAN:FORMerror.
Serial bus analysis