Rohde & Schwarz URV5-Z4 - Detailed Product Information; RF Probe URV5-Z7

4 Voltage Sensors ¸URV5-Z
Frequency response
1.5
1
0.5
0
dB
10 100 200 300 400 500MHz
Frequency
a
b
c
SWR
1.2
1.1
1
10 100 200 300 400 500MHz
Frequency
a
b
c
RF Probe ¸URV5-Z7
The RF probe is a universal tool for mea-
suring RF voltages. The low input capaci-
tance of 2.5 pF makes it virtually non-
loaded and ideally suitable for measure-
ments on non-coaxial circuits up to
500 MHz or up to 1 GHz when appropriate
accessories are used. A plug-on divider
extends the voltage measurement range
from 10 V to 1000 V and at the same time
reduces the input capacitance to 0.5 pF.
Compared to active, high-impedance
probes, the dynamic range of the
¸URV5-Z7 is greater by a factor of 10
to 100, i.e. higher voltages can be mea-
sured with the same sensitivity. With a
dynamic range from 200 ΠV to 10 V with-
out the use of a plug-on divider, the probe
covers all voltage levels common in state-
of-the-art electronic equipment.
Typical frequency response of the RF Probe ¸URV5-Z7 with voltage mea-
surements on a matched 50
: line (without adapter, short ground connec-
tion); a) direct, b) with 20 dB plug-on divider, c) with 40 dB plug-on divider
Typical SWR of a matched 50 : line after connecting the RF Probe
¸URV5-Z7 (without adapter, short ground connection);
a) direct, b) with 20 dB plug-on divider, c) with 40 dB plug-on divider
The RF Probe ¸URV5-Z7, 200 µV to 10 (1000) V, 20 kHz to 1 GHz
RF Probe R&S®URV5-Z7
The RF probe is a universal tool for mea-
suring RF voltages. The low input capaci-
tance of 2.5 pF makes it virtually non-
loaded and ideally suitable for measure-
ments on non-coaxial circuits up to
500 MHZ oruptol GHz when appropriate
accessories are used. A plug-on divider
extends the voltage measurement range
from 10 Vto 1000 V and at the same time
reduces the input capacitance to 0.5 pF.
Compared to active, high-impedance
probes, the dynamic range of the
R&S®URV5-Z7 is greater by a factor of 10
to 100, Le. higher voltages can be mea-
sured with the same sensitivity. With a
dynamic range from 200 uV to 10 V with-
out the use ot a plug-on divider, the probe
covers all voltage levels common in state-
of-the-art electronic equipment.
The RFProhe 3&3” UHV5—Z7, 200/1 Vto 10 (1000/ V, 20 kHz to 1 GHZ
—>
n.
e
m
U1
4/
//,/
0 , 4//
10 100 200 300 400 MHZ 500
Frequency
4»
./
/
P
r.n
Frequency
response
Typical frequency response of the BFProhe H880 URI/517 with voltage mea-
surements on a matched 50 .Qline (without adapter, short ground connec-
tion); a) direct, h} with 20 dB plug-on divider, c) with 40 dB plug-on divider
4 Voltage Sensors R&S°’UBV5-Z
/
/°
/
\\
/
///
%/
10 100 200 300 400 MHz 500
Frequency
4»
1
Typical SW]? of a matched 50 Qline after connecting the HF Probe
3&8‘5’ URI/517 {without adapter, short ground connection);
a) direct, h} with 20 dB plug-0n divider, cl with 40 dB plug-on divider
g
/*
ı ı ı