Roidmi EVE CC - Turning On;Off and Cleaning Modes; Power On;Off; Return to recharge;Dust collection; Quick map building

11
Turning On/Off and Cleaning Modes
Power On/Off
Press and hold the power button for 3 seconds. The power button indicator turns on,
and the main unit enters standby mode. When the main unit is stationary, press and
hold the power button to turn it off, and the indicator will turn off.
When the main unit is in operation, pressing any button will pause the main unit. After a
pause, press the power button again to continue cleaning.
Return to recharge/Dust collection
In standby mode, press the recharge button, and the main unit will return to the dust
collection station to recharge. When the main unit has finished cleaning, it will
automatically return to the dust collection station to recharge, and the indicator will
flash white. If the battery is low during cleaning, it will automatically return to the dust
collection station to recharge. While the main unit is charging, the dust collection station
will automatically collect dust.
Within 2 minutes, the dust collection station will not collect dust multiple times. In the
Do-Not-Disturb Mode, the main unit will return to the dust collection station to recharge,
but the station will not collect dust.
Quick map building
When the main unit is powered on for the first time, there is no map in the app. Place
the main unit into the dust collection station, select quick map building in the app, and
the main unit will only build a map without cleaning. After the main unit automatically
returns to the dust collection station, the map will be completed and saved
automatically.
Memory map
After the main unit successfully completes a quick map building or cleaning and returns
to the dust collection station to recharge, the app will automatically save and update the
map. After the map is successfully built, you can divide, merge areas, or customise room
names in the app.
Full house cleaning
Start full house cleaning through the app or by pressing the power button. The main
unit will first carry out full house cleaning along a set path, then carry out edge cleaning,
and automatically return to the dust collection station to recharge after the cleaning is
finished.