IS YOUR VEHICLE READY TO DRIVE ?
Before each drive, it is important to inspect your Go Kart and make sure any
problems you find are corrected. A pre-drive Inspection is a must. not only for safety,
but because having a breakdown, or even a flat tire, can be a major inconvenience.
If your Go-Kart has overturned or has been involved in a collision, do not drive it
until your Go-Kart has been inspected by your dealer. There may be damages or
other problems you cannot see.
Pre-drive inspection
Check the following Items before you get on the Go-Kart:
• Engine Oil
Check the level and add oil if needed. Check for leaks.
• Fuel
Check the level and add fuel if needed. Also make sure the fuel fill cap is securely
fastened. Check for leaks.
• Tires"
Use a gauge to check the air pressure. Adjust if needed. Also look for signs of
damages or excessive wear.
• Nuts & bolts
Check the wheels to see that the axle nuts are tightened. Use a wrench to make sure
all accessible nuts, bolts, and fasteners are tight.
• Underbody it Exhaust System
Check tor and remove any dirt, vegetation or other debris that could be fire hazard or
interfere with the proper operation of the Go-Kart.
• Air Cleaner Housing Drain Tube
Check for deposits in the drain tube. If necessary, clean the tube and check the air
cleaner housing.
To Next Page
Loading...
