Roland Aerophone mini - Customizing Sound Settings

66
Before You Play
Step 4 Changing the Sound Settings
1. While holding down the [FUNCTION] button,
press the performance key of the item you
want to set, pressing it the appropriate
number of times for the setting you want.
Each time you press the performance key, the
setting value increases, and you hear a number of
beeps corresponding to the selected value.
Example: If you want to change the “1: SAX”
tone to “5: VIOLIN,” hold down the [FUNCTION]
button and press the [TONE] button four times in
succession.
MEMO
You can also change the value of a setting by holding down the
[FUNCTION] button and using the [UP][DOWN] buttons.
Tone Performance key 1 [TONE]
Tone List
Value Tone Name
1 SAX
2 FLUTE
3 CLARINET
4 TRUMPET
5 VIOLIN
6 SAW LEAD (Synthesizer sounds)
* The tone names are also listed on the battery cover of the Aerophone mini
unit.
Volume Performance key 2 [VOLUME]
This adjusts the volume of the Aerophone mini unit. This aects the volume
of the built-in speaker and the volume from the device that’s connected to
the PHONES/OUTPUT jack.
Value Explanation
1–5 Higher values are a louder volume; lower values are a lower volume.
[TONE]
[VOLUME]
[BREATH]
[REVERB]
[FUNCTION]
[UP]
[DOWN]
[TRANSPOSE]
1
2
3
4
5
6
7
¾
²