117
Chapter 4 Using the Performance Functions
Using the Foot Switches
On either side of the expression pedal are two Foot Switches. Different
functions are assigned to each of these two foot switches.
fig.04-07
You can also change the functions assigned to the left and right Foot
Switches. Please refer to
“Changing the Function of the Foot Switch”
(p.
118).
With the factory settings, the following functions are assigned to the left and
right Foot Switches.
You can store functions to be assigned to the foot switch to individual
Registration buttons (p. 90).
Right Foot Switch
Switch the Rotary effect between Fast/Slow.
If Rotary is turned on, the Rotary effect will switch
between “Fast” and “Slow” each time you press the Foot
Switch.
Left Foot Switch
Glide (an effect by which the pitch is lowered by a
semitone while the foot switch is pressed, and is
returned to what is originally was when you release
your foot).
While you are pressing the Foot Switch, the pitch will be
temporarily lowered. When you release the Foot Switch,
the pitch will return to normal gradually.
The Glide effect will only
e applied to the keyboard
section that has been
specified as being the
destination for the Pitch
end/Vibrato lever. Please
refer to “Selecting the
Range of Keys to Which
the Pitch Bend/Vibrato
Lever will Apply” (p. 187).
NOTE
If “Regist Shift” is turned
“RIGHT,” “LEFT,” or
“RIGHT +Load Next,” the
foot switch will function
only to switch registrations
(p. 119).
AT-80SL_60SL_e.book 117 ページ ２００４年３月２３日 火曜日 午前９時３４分
To Next Page
Loading...
Need help?
General
