4-
Adding
Variety
to the
Rhythm
(1 )
Fade In/Out
—
Gradually
increases or
decreases the volume of
a
rhythm
pattern
as it is playing.
This function
allows
you to start the playing with the
volume
gradually
increasing
{
Fade-in
or finish
the playing with the volume gradually
decreasing
(
Fade-out
).
•FADE
IN
1)
With
the
rhythm
stopped, select
a
Variation
pattern
using
C
VARIATION; 1
-
4.
2)
Press
C
FADE IN/OUT
) ,
and the selected
Variation
pattern
wilt
be
played
with
the volume gradually increasing. The rhythm
pattern
indication in the display
will
flash.
FADE
OUT
Press
C
FADE
IN/OUT
)
while a rhythm is playing,
and the
volume will gradually
decrease
until
no sound is heard with
the
rhythm
pattern indication
in
the display
flashing. At this
point, the rhythm will
stop.
* Applause,
snare roll, waves and birds (P.20)
will be
played at
a specific volume level
even
during
fade
in/out
(2)
Auto Fill-in
—
inserts
a
fill when
you change Variation patterns
When you change Variation pattern,
the Auto Fill-in
function
automatically inserts
a fill before
playing
the new Variation pattern.
>)
Pfess
(
AUTO FILL)
(the
indicator
wil! light).
f
O
AQTORLL SVftfC ST.
2)
Press
C
VARIATION;
1-4
while
a
rhythm is
playing.
The CR-80
will insert a fill,
and
then the new Variation pattern will start
playing.
The Fiil-in
pattern played
here
corresponds
to the
previous
Variation pattern.
For example,
if
you
change
Variation
1 to
Variation
2,
Fiil-in
1 is
played and when
changing Variation
4 to
3,
Fill-in
4
is
played.
* When
you select the
same
Variation
pattern currently
being
played,
a
Fill-in will
be played.
3)
To cancel the Auto Fill-in function,
press
(
AUTO
FlDT)
again.
The indicator
wlli go out.
17