Need help?Do you have a question about the Roland CR-80 and is the answer not in the manual?
Details on safe and proper power connections and usage.
Safety measures against impact, liquids, and memory backup battery care.
How to select and play rhythm styles and adjust tempo/volume.
Selecting percussion sounds and drum sets for Key Pad performance.
Setting drum sets and assigning note numbers to percussion sounds.
Steps for entering and selecting songs for programming.
Steps to select and play a programmed song.
Explanation of MIDI standard and message transmission.
Overview of channel and system messages.
Performance information like note number, on/off, and velocity.
Messages for changing drum sets, rhythms, volume, etc.
Starting the CR-80 by playing a connected MIDI keyboard.
Setting CR-80 as master or slave for tempo/start/stop control.
Setting MIDI channel and selecting drum sets for sound output.
Assigning note numbers and setting note control for sound module use.
Setting CR-80 to control external modules via MIDI.
Restoring all settings to factory defaults.
Solutions for problems like no sound, playback issues, and tempo problems.
Resolving issues with MIDI sync, volume control, and keyboard connection.
Diagnosing issues when no sound or incorrect sounds are played.
Addressing problems when playing external modules with the CR-80.
Explains error messages like "Battery Low!" and "Card not ready" and provides solutions.
Maps percussion sounds to default MIDI note numbers.
Specifies MIDI messages sent and received by the CR-80.
To Next Page
General