Roland CR-80 - Troubleshooting External Module Playback; External Module Sound Problems

<When playing an external
MIDI sound
module with the
CR-80>
No sound
is heard
Check if the MIDI cable is connected correctly.
Check if the MIDI iN
connector on the external device is
securely
connected
to
the MIDI OUT
connector
on the CR-80.
Check the volume level of the external device.
Check the volume level of any amplifier, mixer, etc.
-Check if
the MID!
channels are set
correctly.
Check
if
the receive channel of the
external device matches the MIDI
channel of the CR-80 .
Check if
the Note
Numbers are assigned
correctly.
Set
the
Note numbers transmitted by the CR-80 to match
the
Note Numbers (percussion sounds) of
the external device (Page 44).
Changing the Mole
Numbers
does not affect the original
assignment.
Check if
you
have selected a
drum
set
wfithout
the "U
*
" mark.
To
use the Note
Number
assignment
you
have
set, select
a
dnjm
set
with the
"U
*
" mark (Page
44).
49