Roland CR-80 - CR-80 as MIDI Sound Module; MIDI Channel and Drum Set Selection

5.
Using
the CR-80
as a MIDI Sound Module
The CR-80 can
be used as
an external MID! sound module for
a Pad
Controller, Rhythm
Machine or Sequencer, To use the CR-80
as
an external
sound module, set the
following
parameters.
MIDI Channel
(1-16)
Set the
CR-80's MIDI
channel
to
match the transmit channel
of the
externa!
MIDI device.
* The MIDI
channel set on the CR-80
is
used
for both
reception
and transmission.
*
For
a detailed
explanation
of
IvIIDI channels, refer to
page 32.
Selecting
a Drum Set and
Note Number
(DRY/ROOM/POWER/ELECTRIC/JAZZ/BRUSHES/MT-E-CM)
The CR-80
contains 7
different Drum
Sets. Each Drum
Set includes the percussion sounds
shown in
"Note Numbers : Default Settings" on
page 52,
All
sounds
from
"KICK"
to
"BELL"
inclusive, and "COWBELL"
change
depending
on the drum
set you
select.
Percussion
Sounds
stored in
the
Drum
Sets
""~~~~~-~..,Drum
Sets
DRY/U*DRY ROOM/U*RO0M
POWER/U* POWER
KICK Dry kick Room kick
Face kick
SIDE_STICK Side stick Side stick
Side stick
SNARE 1 Real snare
Reverb snare
Birch snare
SNARE
2 Real
snare Reverb snare
Birch snare
LOW_T0M Low attack
tom
Low
room
tom
Low attack tom
MID_TOM
Mid
attack
tom Mid room
lorn Mid
attack tom
H!GH_TOM High attack tom
High
room tom
High attack tom
CLOSED_HH Closed hi-hat Closed hi-hat Closed hi-hat
PEDAL_HH Pedal hi-hat Pedal hi-hat
Pedal hi-hat
OPEN_HH Open hi-hat Open hi-hat
Open hi-hat
CRASH
Crash
cymbal Crash cymbal
Crash cymbal
RIDE
Ride
cymbal Ride cymbal
Ride cymbal
BELL
Ride
cymbal bell Ride cymbal
bell Ride
cymbal
bell
COWBELL Cowbell Cowbell
Cowbel!
40