12
Panel Descriptions
Connection and Settings When Using an FS-5L or Latch-type Footswitch Pedal
When you’re using the FS-6 or FS-5L, you can determine whether the footswitch pedal is on or off by checking its indicator light.
Jack Jack Jack
Function
TIP: TAP/REC/PLAY/DUB
For DELAY: Adjusts the delay time
For LOOPER: LOOPER operation (p. 17)
TIP: EFX
Switches EFX on and off
TIP: SELECT
Switches between the JC
CLEAN and LEAD channels
RING: DELAY/LOOPER MUTE
For DELAY: Switches DELAY on and off
For LOOPER: Mutes LOOPER
RING: REVERB
Switches REVERB on and off
RING: SOLO
Calls up the SOLO function
When
connecting
the FS-5L
When
connecting
the FS-6
CUBE-80X
Rear Panel
DELAY/LOOPER MUTE
TAP/REC/PLAY/DUB
PCS-31
Red
(RING)
White
(TIP)
Polarity switch
REVERB
SOLO
EFX
SELECT
PCS-31
Red
(RING)
White
(TIP)
Polarity switch
CUBE-80X
Rear Panel
BA
Red
(RING)
White
(TIP)
PCS-31
DELAY/LOOPER MUTE TAP/REC/PLAY/DUB
Set the switches as shown as bellow.
REVERB
SOLO
EFX
SELECT
BA
PCS-31
Red
(RING)
White
(TIP)
Set the switches as shown as bellow.
cube-80x.book 12 ページ ２００８年１２月１２日 金曜日 午後６時７分
To Next Page
Loading...
