Need help?Do you have a question about the Roland DJ-70 MK II and is the answer not in the manual?
General| Type | Sampler |
|---|---|
| Sampling Frequency | 44.1 kHz |
| Bit Depth | 16-bit |
| MIDI | In, Out, Thru |
| Display | LCD |
| Internal Memory | 2 MB |
| Storage | 3.5 inch floppy disk drive |
| Effects | Chorus, Delay |
| Inputs | 2 x 1/4" (L/R) |
| Outputs | 2 x 1/4" (L/R) |
Details keyboard features, input/output impedance, residual noise, and interface types.
Covers sampling rate, data format, A/D, D/A, signal processing, disk drive, and display.
Outlines power consumption, dimensions, weight, and standard accessories included.
Details the screw removal process for accessing the bottom cabinet.
Instructions for starting and stopping the device's test mode.
Details on performing memory tests including Boot ROM and EEPROM.
Describes how to check wave memory configuration and perform memory checks.
Details the process for verifying wave memory data integrity.
Tests for front panel switches and LCD display functionality.
Procedure to test all LED indicators on the unit.
Tests for panel controls, modulation, encoder, scratch, and MIDI communication.
Procedure for testing the keyboard keys and velocity response.
Tests for SCSI device connection and floppy disk read/write operations.
Tests for D/A MSB adjustment, D/A check, and A/D offset adjustment.
Guide for installing SIMMs and verifying expanded memory capacity.
Information on compatible SIMMs, including Roland-labeled and non-Roland labeled modules.
To Next Page
