Roland E-4 - Setting the Clock Timing

Using the Looper
27
Setting the Clock Timing
The dot in the bottom right of the display appears when the unit is waiting for a clock timing from an external device.
1. Press the [AUTO PITCH] button, [HARMONY] button and [VOCODER] button at the same time.
Switches the unit to menu mode.
2. Select using the [FORMANT] slider.
Value
Explanation
1_8
(1/8),
1_4
(1/4),
1_2
(1/2),
1
(1)
Sets the clock timing at which the schedule starts.
3. When you are finished, press the [AUTO PITCH] button, [HARMONY] button and [VOCODER] button at
the same time.
* The timing to start synchronization is different depending on what the clock is synchronized to.
External MIDI: Synchronization starts when the external device starts.
SYNC IN (trigger): Synchronization starts when you press the record button.