Roland E-X30 - Playing Songs; Select a song; Record; Prepare for Recording

10
Jul. 2019 E-X30
Keys
* This test item cannot be skipped in the middle of executing.
When entered, the LCD will show the following image:
fig.test-key.eps
Testing procedures:
Press the keys strictly from right to left (indicated by the arrowhead in the image below) using medium touch force.
Pass: hear a pass tone.
Fail: When pressing a wrong key or the touch force is not within range, you will hear an error tone.
fig.test-key-keyboard.eps
The LCD shows the currently pressed key and the touch level.
fig.test-key-current.eps
Pedal
* Before entering this test item, connect the pedal switch to the SUSTAIN jack.
When entered, the LCD will show the following image:
fig.test-pedal.eps
Testing procedures:
Press the pedal.
Pass: hear a pass tone.
Fail: hear an error tone.
* If DP-2 is used, the pass or error tone sounds when releasing after pressing.