Roland FANTOM-07

Using the Vocoder
150150
Saving the VOCODER SETTING
After editing the vocoder settings, save them in the VOCODER
SETTING user bank.
1. On the VOCODER EDIT screen, touch <WRITE>.
The VOCODER SETTING WRITE screen appears.
2. If you want to edit the name, select [E1] RENAME.
After you have edited the name, select [E6] OK to close the
window.
3. Use the [VALUE] dial or the [DEC] [INC] buttons to
select the save-destination.
4. Select [E6] OK.
A conrmation message appears.
If you decide to cancel, select [E6] CANCEL.
5. Select [E5] OK.
The settings are saved in the user bank.
MEMO
If you also save the scene after you save the settings in the user
bank, you can then simply select the scene next time, and the
VOCODER SETTING you saved is recalled in tandem.