Roland FP-8 User Manual

2 Turn both instruments on.
3 Adjust the volume of the other instrument with its volume control.
4 You can further control the level of the external device by using the
INPUT LEVEL knob. If you have connected a drum machine or
synthesizer, for example, rotate the knob towards LINE. If you have
connected a microphone, rotate the knob towards MIC.
BY * If the device you are connecting has a monophonic output, be sure to
connect it to the L(MONO) input of the FP-8.
Recording on a Cassette Deck
lf you have a stereo cassette deck (or blaster) with LINE IN jacks, you can
record directly to cassette tape. Turn off both devices before making any
connections.
1 Connect the two devices as shown in the following diagram. To make
this connection you may require an RCA adaptor for one end of each
cable (the PJ-1M cable set includes such an adaptor).
LINE OUT L/R LINE IN UR
ai MIC R CMONOY fo LMONO)
Feo REVEL. eh STEREO at AL stenco: Z
i INPUT: he heme INE OUT
2 Turn both units on.
3 Set the cassette deck for recording. Set an appropriate recording level
using the deck's input level controls and the FP-8's LINE LEVEL
slider (output level conirol).
4 Adjust the FP-8's monitor voiume (internal speakers or headphones)
with the MONITOR LEVEL slider.
ys
i
*
if
you
wish
to
record
in
mono,
connect
the
L(MONO)
LINE
OUT
jack
of
the
FP-8
to
the
L(MONO)
input
jack
of
the
cassette
deck.

Roland FP-8 Specifications

General

Brand	Roland
Model	FP-8
Category	Musical Instrument
Language	English