Roland FP-8 User Manual

4 4
5
y 124
7
“" MARIATION a
MODE: Press this button [in conjunction
with the FUNC (Function) button
and the VARIATION buttons] to select
the MIDI mode (a combination of
settings). /f the.FP-8 is to be used by
itself, there will be no need to change
the default setting (Mode |), P. 19
PGM CHANGE (Program Change):
Press this button [in conjunction with
the FUNC (Function) and VARIATION
buttons] when you wish to send a Program
Change message (Tone change message)
to an external device. /f the FP-8 is to be
used by itself, there will be no need to
send Program Change messages. P. 718
TOUCH: Press this button [in
conjunction with the FUNC (Function)
button and the VARIATION buttons] to
select one of three Keyboard Touch
settings: Light/Standard/Heavy. P. 76
TRANSPOSE: Press this button [in
conjunction with the FUNC (Function)
button and the VARIATION buttons} to set
the key transpose function. You can trans-
pose the pitch up a maximum of 5 semitones,
or down a maximum of 6 semitones. P. 77
PEDAL ‘DEMO
ALY
R
meee FUNC Ie
PEDAL: The piano includes two pedal
jacks (rear panel). A pedal connected to
the DAMPER jack will always function
as a damper (sustain) pedal. A pedal
connected to the SOFT jack can function in
one of three ways: as a soft pedal, sostenuto
pedal, or expression pedal. Press this but-
ton [in conjunction with the FUNC (Function)
button and the VARIATION buttons] to se-
lect the desired peda! function. P. 72
DEMO: Press this button [in
conjunction with the FUNC (Function)
button and the VARIATION buttons] to
hear the Demonstration songs. P. 14
FUNC (Function): When used in
conjunction with other panel buttons,
this button activates a second function.
For example, pressing the PLAY
(DEMO) button by itself will start playback
of a recorded performance. However,
if the PLAY(DEMO) button is pressed
after the FUNC button has been pressed
(the FUNC button indicator is lit), the
DEMO function becomes active. The
TX CH, RX CH, MODE, PGM CHANGE,
TOUCH, TRANSPOSE, PEDAL, and DEMO
functions all become active only after
the FUNC button has been pressed.

Roland FP-8 Specifications

General

Brand	Roland
Model	FP-8
Category	Musical Instrument
Language	English