Roland FP-E50 User Guide

FP-E50 User Guide for Additional Roland Cloud Contents (Ver. 1.10)
55
Initializing the User Licenses
If you’ve initialized the user licenses, you’ll be able to import or install
Sound Pack, Style Pack and Wave Expansion that you downloaded using a
new user license.
NOTE
¹ You must perform a factory reset before initializing the user
licenses.
¹ When you execute a factory reset, the settings that you saved (data
that was created) are lost completely and restored to the factory
settings. Refer to “Returning to the Factory Settings (Factory Reset)”
(Reference Manual) for details.
¹ When you do this, all installed Wave Expansions or previously
imported Style Packs are deleted.
¹ Never turn o the power or disconnect the USB ash drive during a
process, such as while the “Executing…” display is shown.
1. Press the [MENU] button.
2. Use the [ää] [åå] buttons to select “Utility”, and then
press the [Enter] button.
3. Use the [ää] [åå] buttons to select “Factory Reset”, and
then press the [Enter] button.
The Factory Reset screen appears.
4. Make sure that the check box for the “Remove License”
item is selected.
If the check box is not selected, use the [ä] [å] buttons to select the
“Remove License” item, and press the [Enter] button to select the check
box.
5. Use the cursor [ää] [åå] buttons to select “EXECUTE”, and
then press the [Enter] button.
A conrmation message appears.
If you decide to cancel, press the [Exit] button.
6. To execute, use the [ææ] button to select “OK”, and then
press the [Enter] button.
The display indicates “Completed. Turn o power”.
7. Turn the power of the FP-E50 o, then on again.
The user licenses are initialized.
Error Message
Message Action
Expansion File Not
Found!
This appears if the USB flash drive does not
contain a Wave Expansion file.
Check that the file is correctly saved, and that
the file extension is “.exz”.
Incorrect File!
This appears if the selected file is not
compatible with the FP-E50, or if the file is
damaged.
Check the models that are listed as
compatible for the file you downloaded, and
try downloading again.
Incorrect License! Please
Remove License
This appears if the selected file is associated
with a different user license.
To install, you must either obtain a file that
has the same user license as the currently-
installed sound file, or initialize the user
licenses.
Expansion Memory Full!
This appears if there is insufficient free space
for installation.
To install, you must uninstall a currently-
installed Wave Expansions to create free
space.
It has already been
installed
This appears if the selected file is already
installed.
There is no need to reinstall.

Roland FP-E50 Specifications

General

Sound effects	Ambience
Tones quantity	726
Pedals quantity	3
RMS rated power	11 W
Speaker diameter	120 mm
Number of speakers	2
Maximum polyphony (notes)	256
Bluetooth version	4.2
Headphone outputs	1
USB connector type	USB Type-A, USB Type-B
Keys quantity	88 keys
Product color	Black
Tuning frequency	415.3 - 466.2 Hz
Temperament types	Arabic, Equal, Just Major, Just Minor, Kirnberger I, Kirnberger II, Kirnberger III, Meantone, Pythagorean, Werckmeister
Temperaments quantity	10
Power source type	AC
Display resolution	160 x 160 pixels

Weight and Dimensions

Depth	322 mm
Width	1300 mm
Height	174 mm
Weight	17100 g