Tempo-related settings (Arranger Options)
G-70 Music Workstation
r
83
■Using the Ritardando/Accelerando functions
(4) For general applications (any Style division) pro-
ceed as follows:
• Assign the RITARD and ACCELER function:
• Press the [START÷STOP] button to start Style play-
back.
• Press the assigned button or footswitch. If you assign
two controls, can increase (ACC) and decrease (RIT)
the tempo.
(5) For Ritardandos that apply to Ending patterns pro-
ceed as follows:
• Press the [START÷STOP] button to start Style play-
back.
• Press the [END/RIT] button twice in succession (“dou-
ble-click”).
This selects an Ending pattern and slows down the
tempo according to the ACCELER/RITARD and MEA-
SURE settings. When the Ending phrase is finished
(and Arranger playback stops), the tempo is reset.
(6) For Fill Ritardandos:
The FILL RIT function is suitable for ballads. It causes
the next Fill-In to slow down (“ritardando”). Try using
this function now:
• Switch on the [AUTO¥FILL-IN] button.
• Press the [MENU] button.
• Press the [ARRANGER¥SETTING] field, followed by the
[ARRANGER¥OPTIONS] field.
• Start Arranger playback and press the [FILL¥RIT] but-
ton icon to switch it on.
• Press [MAIN] and a VARIATION] [1]~[4] button.
At the next downbeat, the G-70 plays a Fill-In. The
tempo slows down while the fill is being played. At
the end of the fill, the Style returns to the previously
set tempo (this is called “a tempo”).
(7) Press the [EXIT] button to return to the main page.
ASSIGN SW buttons: “Arranger RIT Tempo” & “Arranger
ACC Tempo” on p. 63
FC-7 footswitches: “Arranger RIT Tempo, Arranger ACC
Tempo” on p. 67
INTRO MAIN END/RIT START STOP
BASS
INVERSION
AUTO
FILL IN
VARIATION
12 3 4
SYNC
STYLE CONTROL
INTRO MAIN END/RIT START STOP
BASS
INVERSION
AUTO
FILL IN
VARIATION
12 3 4
SYNC
STYLE CONTROL
MENU
To Next Page
Loading...
Need help?
General
