1. Connect the instrument, mic, or audio
player etc. that you want to record to
the GO:MIXER PRO-X.
2. Connect the included USB cable rst to
the GO:MIXER PRO-X and then to your
smartphone (p. 6).
* If you are unable to record on your smartphone,
slowly repeat step 2 once again.
* To prevent malfunction and equipment failure,
always turn down the volume, and turn o all
the units before making any connections.
* Before turning the unit on/o, always be sure to
turn the volume down. Even with the volume
turned down, you might hear some sound
when switching the unit on/o. However, this is
normal and does not indicate a malfunction.
* If operating on batteries, the POWER indicator
blinks when the batteries run low. If you
continue using the unit in this state, the power
automatically turns o after approximately one
minute. Replace the battery as soon as possible.
* In some cases, noise might be heard when you
connect a smartphone, or when you start up or
operate an app.
* The POWER indicator may ash twice when you
connect your smartphone if the smartphone’s
batteries have degraded. This is not a
malfunction.
3
To Next Page
Loading...
